One of the essential parts of a skateboard is the bearings. They help your wheels turn and make skating much more enjoyable. However, if your bearings get dirty or wet, they can start to wear down and even break. In this post, we’ll show you how to get them out of your skateboard wheels so that you can replace them with new ones. Let’s get started!

Remove Bearings from Electric Skateboard Wheels
The first thing you’ll need to do is remove the wheels from your skateboard. To do this, you’ll need to loosen the trucks.
Once the trucks are loosened, you can simply pop the wheels off. Next, you’ll need to remove the bearings from the wheels. To do this, you’ll need a bearing remover tool.
You can purchase one of these online or at a skate shop. Once you have the tool, simply insert it into the bearing and twist. The bearing should pop right out. Repeat this process for all of the bearings in your wheels.
Finally, you’ll need to clean out the bearings themselves. To do this, you can use a bearing cleaning solution or simply rinse them off with water. Once they’re clean, you’re ready to install new bearings and put your wheels back on your skateboard.
That’s it! By following these simple steps, you’ll have no trouble getting the old bearings out of your skateboard wheels and replacing them with new ones. Thanks for reading!
Clean Bearings and Lubricate them for Optimal Performance
Once you have the old bearings out of your skateboard wheels, it’s time to clean them. To do this, you can use a bearing cleaning solution or simply rinse them off with water. Once they’re clean, you’ll need to lubricate them. This will help them spin more smoothly and last longer.
To lubricate your bearings, you can use a bearing lubricant or simply apply a drop of oil to each one. Once they’re lubricated, you’re ready to install them back into your skateboard wheels.


Tips for Installing New Bearings in Electric Skateboard Wheels
Now that you have your new bearings, it’s time to install them back into your skateboard wheels. To do this, simply insert the bearings into the wheel and then pop the wheel back onto your skateboard.
Once the wheel is in place, tighten the truck back down. That’s it! You’re now ready to enjoy



Important to Keep your Bearings Well-Maintained
As you can see, it’s not difficult to remove and install bearings in electric skateboard wheels. However, it’s important to keep them well-maintained. This means cleaning and lubricating them on a regular basis.
If you don’t do this, the bearings will start to wear down and eventually break. This can cause your skateboard to stop working properly and can even be dangerous.
So, be sure to take good care of your bearings and you’ll be able to enjoy skating for years to come!
FAQs
Q: How often should I clean and lubricate my bearings?
A: It’s a good idea to clean and lubricate your bearings every few months. However, if you skate frequently or in dirty or wet conditions, you may need to do it more often.
Q: Can I use any type of oil to lubricate my bearings?
A: No, you should only use a bearing lubricant or light oil. using a heavy oil can cause the bearings to become too greasy and will actually make them slower.
Q: How can I tell if my bearings need to be replaced?
A: If your bearings are making noise or feel gritty when you spin them, they need to be replaced.
Q: Can I put new bearings on old wheels?
A: Yes, you can put new bearings on old wheels.
Conclusion
We hope you found this article helpful. Skateboarding is a great way to stay active and have fun. However, it’s important to take care of your skateboard and keep it in good working condition.
By regularly cleaning and lubricating your bearings, you can extend the life of your skateboard and ensure that it continues to perform at its best.